Use

For the wipe disinfection, use an aqueous solution and dosage as required. To measure the correct dosage, use lid as a measuring cup. Add liquid concentrate to the cup until liquid reaches desired scale ml unit (20 ml lower scale, 40 ml upper scale). Completely moisten surfaces to be disinfected. 1 m² requires 20-40 ml ready-to-use disinfection solution.

Scope & Application

• For the wipe or scrub disinfection of washable surfaces on medical devices, medical infrastructure and appliances
• Also suitable for the immersion disinfection of large medical devices such as urine bottles and bowls
• Suitable for floors made of natural stone, slab plates, PVC, walls, sanitary devices, tiles, and laboratory benches

Effective spectrum / Exposure times

Complies with European Standards EN 1040, EN 1275, EN 1276, EN 1650, EN 13624, EN 13697 (bacteria, C. albicans), EN 13727, EN 14348 and RKI / DVV guidelines

Dosing

	Concentrate	Water	Time
0.50%	20 ml	3980 ml	30 min.
2.00%	80 ml	3920 ml	15 min.

Material Compatibility

Frequently Asked Questions

• What is the difference between ISORAPID^® Floor and ISORAPID^® Spray?
  ISORAPID^® Spray is designed for the rapid disinfection of small surfaces and medical devices. ISORAPID^® Floor, however, is a concentrate that is deployed as a water-based disinfecting solution for use on large surfaces and sanitary equipment.
• When should floors be disinfected?
  It is recommended to clean and disinfect the floors in the treatment area at the end of each working day. Visible contamination by blood, saliva or other infectious secretions must be treated immediately.
• How much ISORAPID^® Floor is required to disinfect one square meter?
  1?m² requires between 20-40 ml of ready-to-use solution. ISORAPID^® Floor is highly economical: 1 liter ISORAPID^® Floor used as an 0.5% solution produces 200 liters of read-to-use solution. In other words, 1 liter will disinfect up to 10’000m².
• Is ISORAPID^® Floor suitable for all floor types?
  ISORAPID^® Floor has been extensively tested for material compatibility. Nevertheless, we recommend to apply the product on a small inconspicuous area first before deploying it extensively on a new material.

Composition in 100 g

Physical properties

Precautions

R34 Causes burns. S2 Keep out of the reach of children. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 After contact with skin, wash immediately with plenty of water. S35 This material and its container must be disposed of in a safe way. S37/39 Wear suitable gloves and eye/face protection. S46 If swallowed, seek medical advice immediately and show this container or label. For further information see safety data sheet. Use disinfectants safely. Always read label and product information before use.