A gentle and economical concentrate for the cleaning and disinfection of large water-washable surfaces.
- 3 Advantages
- Excellent material compatibility
Care-free use even on Plexiglas - Abundant concentrate
Save up to 500% with an easy-to-use application - Simple application
Lid includes markers allowing for easy dosing
The product is free of aldehydes and phenols. Easy handling and high dosage accuracy is achieved by means of a specifically designed lid which shows the required 20 ml marker, thus offering an ecological and economical practice-friendly application of the product. PROSEPT® Floor is biodegradable.
Easy to use
Just follow these easy steps:
- Prepare required working solution according to the instructions on the label and use the 20 ml scale markings on the inside of the lid.
- Use a mop and wipe disinfection and cleaning procedure for the surfaces to be treated. Ensure that all areas of the surfaces are completely moistened.
- Follow exposure times.
Germ-free
in a few minutes
| Bactericide / Fungicide | |
| 0.75% | 240 minutes |
| 1% | 60 minutes |
| 2% | 15 minutes |
| Hepatitis B1 incl. HIV | |
| 5% | 1 minute |
| Influenza A Virus | |
| 0.75% | 15 minutes |
Complies with DGHM Standard Methods and AFNOR NF T 72150 /NF T 72170 (Spectrum 4) and AFNOR NF T 72200
Highly efficient
2 liters of concentrate produce 200 liters of working solution
Extensive testimonials
Experts testify
Prof. Dr. G. Frösner, München, D, 1997; Prof. Dr. E. Marth, Graz, A, 1997; Prof. Dr. R. Schubert, Frankfurt, D, 1997, 2003, 2007; Dr. J. Steinmann, Bremen, D, 2005; Prof. Dr. H.-P. Werner, Schwerin, D, 2000, 2001
Excellent material compatibility
Which materials are suitable
PROSEPT® Floor has been successfully tested for compatibility with the following materials: surfaces of medical devices such as dental units made of PE, PTFE, PP, silicone, rubber parts, PVC, acrylic glass (as a concentrate and working solution), aluminum (at 21 ºC und 55 ºC), steel, cast iron.
I personally guarantee for the excellent material compatibility of our products with my signature.
Do you have the same questions?
Our R&D team answers:
- Do floors need to be disinfected in the first place?
Research has shown that floors become heavily contaminated with germs, even though they do not belong to the actual chain of pathogen transmission. Besides the obligatory daily cleaning, the floors should also be regularly disinfected. - When should the floors be disinfected?
It is sufficient to clean and disinfect the floors at the end of the working day. However, visible contaminations such as blood or saliva must be immediately removed with appropriate means and the contaminated area must be disinfected. - How do I properly disinfect the floor?
Floors are disinfected in the exact same way as they are cleaned. Some options include the OROCLEAN® Floor Wiper, special steam vacuums or the two-bucket method. It is important to always use a fresh solution. - How long can the working solution of a surface disinfectant be used?
According to the recommendations of the Robert Koch Institute, disinfectant working solutions should be used for a maximum of one working day. Afterwards, a new solution must be prepared.
Why is
PROSEPT® Floor so efficient
Composition of 100 g: 10 g Quaternary ammonium compounds, perfumes, dyes.pH-Value: 1% working solution: 7.0
Density (20 °C): 1.0 g/ml (g/cm3)
Keep in mind
For your safety
Irritating to eyes and skin. Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water. Wear suitable gloves and eye/face protection. Use disinfectants safely. Always read label and product information for use.
Delivery Forms
